Previous:
HobbyWing Micro F4 G2
From
$33.99
Next:
VIVAFPV F4 FC WITH OSD PDB
$34.95

Radix LI 20x20 Flight Controller with Graphical OSD

$49.99
or
SKU: OAS983

BrianFPV has brought the FPV Community the FIRST graphical OSD 30x30 Flight Controller the Radix 30x30 Flight Controller. NOW, they are bring the same features plus more we all have grown to love, but in a 20x20 mounting option. Introducing the BrainFPV Radix LI!! The Radix LI pairs really well with the Aikon 35A 6S 4-in-1.

 

Specifications:

  • Processor: STM32F446RET6, Coretx-M4, 32bit, 180MHz, 128kB RAM, 512kB Flash.
  • IMU: Bosch Sensortec BMI160 running at 3.2kHz, connected using SPI.
  • OSD: Full-graphic, PAL/NTSC auto detect, adjustable black and white levels. Full Betaflight OSD support with extra graphical features. Support for side-by-side 3D when used with a 3D FPV camera.
  • Motor Outputs: 6 outputs with full DSHOT (150/300/600/1200) and OneShot support.
  • Receiver Support: PPM, S.Bus (inverter built-in), DSM, HoTT,  SRXL, CSRF, FPort ready. 5V or 3.3V supply for receiver. Receiver is powered from USB for easy and safe setup.
  • Telemetry Support: FrSKY Smart Port, FrSKY Sensor Hub, HoTT Telemetry, SRXL, CSRF, FPort ready. Built-in inverter for FrSKY telemetry.
  • Serial Ports: 4 full serial ports (UARTs). UART3 and UART6 have inverters for S.Bus and SmartPort telemetry. Inverters are automatically enabled/disabled for maximum flexibility. 
  • RGB LEDs: Dedicated RGB LED output.
  • Camera Control: Dedicated output for accessing the camera menu to change camera settings.
  • Buzzer Port: Dedicated port for 5V (100mA max) buzzers.
  • Analog Inputs: Voltage sensing  (VBAT), current input (3.3V max).
  • Power: 3S - 6S (7.5V - 26V), 500mA BEC
  • Dimensions: 26.5mm x 26.5mm, 20mm hole spacing. 4.1mm holes for anti-vibration grommets for M3 screws.
  • Weight: 4g
  • Gluten free, Non GMO, Free Range Anorganic Gyro

Includes:

  • RADIX LI flight controller
  • Silicone anti-vibration grommets 4x
  • BrainFPV 4-in-1 ESC cable kit (cables and connectors to make a cable that works with any 4-in-1 ESC with a JST-SH 7 pin, 8 pin, or 10 pin connector)

Compared to the RADIX, the RADIX LI:

SMALLER

(duh): 20mm hole spacing, 26.5mm x 26.5mm outside dimensions

HAS 5V REGULATOR

Can be powered directly from a 3S - 6S LiPo battery (500mA BEC built-in)

NO BARO

You can attach a GPS to it if you want to know how high you are

NO MICRO SD SLOT

Who needs blackbox if you can use the custom BrainFPV OSD spectrograph for tuning?

NO ANALOG RSSI INPUT

Using RSSI or LQ over an RC channel is more common and more accurate anyways.

SO RIDICULOUSLY CUTE

It is just cuter. Nothing more to say.

 

 

hello features

There are WAY MORE features than customizing your logo on the splash screen. Features you cannot get with the normal Betaflight OSD. You have heard about the graphical features of our OSD. But what exactly are they, and how do I use them? Find out about all the cool features and how to enable them here: HOW TO PIMP YOUR BRAINFPV OSD

 

 

x

Welcome to the Loyalty Points Demo Store :-)

Sign up and receive 5000 pts to test out in our Store.

Earning and redeeming Rewards Points

$1
Earns you
5
$1
Redeems to
50

Ways you can earn

  • Product Purchase
  • Refer a friend
  • Share on social media

Learn more about our program